Share This Post

Uncategorized

Richard Mille RM 052 Skull Tourbillon Replica watch

With the popularity of today’s fashion richard mille sapphire watch sports and leisure style, the chronograph has a strong sense of movement, large size and rich design elements. In fact, the watch with timing function is not necessarily for timing, but really needs timing. Instead of using a pointer chronograph, the referee uses an electronic chronograph stopwatch for liquid crystal display. Wearing a chronograph is because it is cool, beautiful, and professional. Some friends who wear chronographs don’t know how many small dials are used for a long time.

Here is a brief introduction to the use and maintenance of chronographs. Precautions. How to use the timing function: Generally speaking, the chronograph must have the function of recording seconds and minutes. Now most chronographs have three small dials + two buttons, the position of the small dial and buttons of different brands and models. The shape is also different, but how to change the design of the case and dial, are inseparable from these indication scales. The small dials are: minute counter, hour counter, and small seconds dial. The two buttons are: timing start/stop, timing reset to zero. The style of the chronograph is different. The positions of several small dials and buttons are not necessarily the same. You can see the scale of the small dial or refer to the manual. The maximum number of the minute dial is 30, which can record 30 minutes. The maximum number of the hour dial is 12, which can record 12 hours of hourly.

The large second hand of the richard mille replica chronograph is used for timing. When the timing function is not activated, the large second hand is stationary at 12 o’clock. Timing use steps: The first step: press the timing button to start the timing, the big second hand starts to move, the big second hand walks one circle, the minute clock takes one space; the minute clock takes a circle, and the hour counter takes one space. Analogue: Step 2: When the timing button is pressed again, the timing stops, the scale indicated by the large second hand and the chronograph is the chronograph reading; the third step: after the timing is completed, press the reset button to zero, and the chronograph is reset to zero. Because in general, the big second hand does not go, so the chronograph is different from the ordinary watch. The big second hand always stops at 12 o’clock, so some unfamiliar friends see the chronograph on the wrist of others. If the second hand does not go, I think the watch is stopped.

This is not the case. Maintenance precautions: 1. When operating the timing function, operate in the order of operation, that is, the three steps mentioned above: start timing – stop timing – reset to zero. Especially for mechanical chronographs, the operation timing buttons should not be too frequent. Because there are many mechanical gear parts, it can reduce the gear wear and reduce the failure rate according to the conventional sequence operation, which is beneficial to the maintenance of the movement. 2, to avoid violent collisions, especially mechanical chronographs, the more faulty parts of the gear parts, the higher the failure rate will be, which is proportional, when the timing function is used, the gear parts are running, if subjected to intense collision, it is easy to make Misalignment of the gear causes a malfunction. 3, it is recommended not to let the chronograph always in the state of timing, that is, do not keep the timing function, because the chronograph is not timing, the big second hand is stopped, so some friends in order to let the watch “When you like to start the timing function, it will always be on, so that the big second hand is always on, so you can avoid others saying that “the watch has stopped.” But in fact, this is not good.

The replica watches uk mechanical chronograph has long-time timing function for the accuracy of travel time and The clockwork energy output will have an effect. Quartz chronograph should not always have the timing function. The big second hand and the small second hand are two stepping motors respectively. At the same time, the walking will be particularly power-consuming. I once saw a person holding the Casio quartz chronograph to the maintenance point. Replace the battery, and he said that the newly bought watch had no electricity for less than half a year, and later learned that he was always on the clock. Quartz chronographs can have a life of 3-4 years if the battery is used normally, but if the chronograph function is always on, the battery will run out of power in less than half a year. Mechanical chronograph is a mechanical watch with complicated functions. It is one of the symbols of high-end watches. Usually, mechanical chronographs are expensive, and only the chronographs will stop at 12 o’clock. Those cheaper multi-eye watches with no timing function are always walking and can’t stop, so friends who really understand the watch will not start the chronograph in non-timed situations, which will make the watch look “cheap”.

The moon phase chronograph uses a PVD rose gold-plated case, and the warm colors give the watch an elegant look. As with its unique front-end models, the new models are also equipped with a high-precision PrecidriveTM movement and a unique timing device layout. The new black dial adds a touch of unique elegance and contrast to the new watch, creating a gorgeous aesthetic with a rose gold case and an elegant crocodile leather strap.

Inspired by the mysterious colors of the moon and the quiet, timeless precision, the Certina DS-8 moon phase chronograph has been favored by watch lovers for decades. The new DS-8 watch is very original in the layout of the chronograph. The designers of the Certina are paired with a contrasting black dial for a refined and elegant effect. The interior of the watch is equipped with a high-precision PrecidriveTM movement.
The precision matte sun-patterned black dial is equipped with an easy-to-read date window at 4 o’clock. The slim hour and minute hands and the large-size multi-section time stamps are all PVD-plated rose gold, decorated with luminous materials to show the atmosphere. Excellent readability in a variety of lighting conditions. All the time counters are cleverly laid out. The 60-minute counter has a window that displays 12-hour timekeeping information, while the 60-second timekeeping information is displayed through the central long-second hand. This allows full moon phase information including the monthly cycle and average cycle time to be displayed in a dedicated time replica swiss watches dial at 10 o’clock.

Share This Post

Leave a Reply

Your email address will not be published. Required fields are marked *

You may use these HTML tags and attributes: <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <s> <strike> <strong>

Lost Password

Register